High Pressure Water Blester Road Marking Removal Machine
- Factory direct sales
- High quality and stable
The TongChang TC2800 is a water blasting and recovery system designed for either asphalt or concrete airfields and roadways for paint and thermoplastic removal, surface preparation, road retexturing, hydraulic spill cleanup, and removal of rubber deposits from airport runways.
TongChang Teck
What is Hydro Jetting Recycling Line Removal Machine?
A recycling high-pressure water line removal machine is an efficient and eco-friendly road marking removal device. It utilizes high-pressure water jet technology, using a special high-pressure spray gun to rapidly spray out high-pressure water, which thoroughly removes old road markings. This type of line removal machine not only has high removal efficiency but also does not damage the road surface, complying with environmental protection standards.
During the removal process, the recycling high-pressure water line removal machine sucks the waste water and debris into a sewage tank, achieving simultaneous recycling and cleaning, thus preventing secondary pollution to the road surface.
- 20+ Years of Experience
- 24/7 Availability
Our Machine Contain
Main components of
high-pressure water Road Marking removal machine:
🔋 Power System:
The machine is powered by a Cummins internal combustion engine, which provides the necessary energy for operation.
💧 High-Pressure Pump:
A plunger booster pump increases the water pressure to a powerful ≥160 MPa.
🚰 Water Tank:
This tank stores clean water, which is then transported to the high-pressure pump through a system of pipes.
🛠️ Nozzle:
Specially designed high-pressure nozzles convert the pressurized water into high-speed micro water jets.
🎛️ Control System:
The control system includes valves, pressure regulators, and check valves to adjust the pressure and flow of the water, ensuring the machine operates smoothly.
♻️ Recovery System:
Equipped with a vacuum suction device and filtration system, the recovery system collects wastewater and debris during the cleaning process, reducing environmental pollution.
TC2800
Parameters and Advantages
Low Failure Rate:
With experience from producing over 100 units, the stability of the product is well guaranteed.
Vacuum System:
The side exhaust design includes noise-reducing insulation, making the system quieter.
Filter:
The filter cartridge has a filtration precision of 5 microns, which helps extend the life of the high-pressure pump.
Adjustable Pressure:
Equipped with a high-pressure pump pressure regulator, allowing pressure adjustment between 110 MPa and 250 MPa.
Debris Protection:
Prevents debris from entering the vacuum fan.
Remote Waste Disposal:
The waste box can be emptied remotely, allowing for easy and convenient waste management.
TC2800 WORKFLOW
Workflow of
the High-Pressure Water Line Removal Machine:
1
Generating High-Pressure Water:
The machine uses a high-pressure pump to increase the water pressure to the required level, typically reaching 160 MPa or even higher.
The pressurized water is then sprayed through specially designed nozzles, creating a fan-shaped jet with immense impact force.
2
Road Marking Removal
- Cutting Action: The high-pressure water acts like a sharp blade, slicing through the road marking material and creating cracks.
- Peeling Action: The water then penetrates these cracks, getting between the marking material and the road surface. The impact force and rapid vaporization of the water help peel the markings off the road.
- Scrubbing Action: Finally, the peeled-off marking material is completely washed away by the continuous stream of high-pressure water.
3
Recovery System:
TongChang TC2800 machines come equipped with a recovery system that uses vacuum suction to collect the used water and remove marking debris, helping to reduce environmental pollution.
This high-pressure water removal technology is not only efficient and fast but also environmentally friendly, leaving the road surface undamaged. It’s widely used for removing markings on municipal roads, highways, and airport runways.
TongChang
F A Q
You ask, we answer
- Working together to save your costs for Road Marking Removal.
- Offering professional OEM & ODM for special projects.
- Sustainability considerations cover how we design and manufacture.
- Some regular products are in Stock.
TongChang is committed to quality across all aspects of our business – our people, processes and products. We call this ‘the RANKING BIT standard’.
- For regular products, our delivery time is 15-20 working days at receipt of your payment.
- For customization products, leading time depends on our production line
TongChang company supports payment through wire transfer and trade assurance.
Want to know how to compress lead times?
Send us a message if you have any questions or request a quote. Our experts will give you a reply within 24 hours and help you select the right bits you want.